Gorilla Epoxy 25Ml
€10.00
€400.00/litre
Description
Gorilla Epoxy Resin and HardenerImpact-tough formula5-Minute set timeWithstands moderate exposure to waterFind more at gorillaglue.comSets in 5 min.‡‡Set time varies with volume of material and application temperature.Water Resistant**Not recommended for continuous submersion or below-waterline use.Bonds:- Metal- Plastics†- Ceramic- Wood- Glass- and more!†Not recommended for use on polyethylene or polypropylene plastics.For the Toughest Jobs on Planet Earth®Withstand extreme temperaturesResealable syringe- Solvent resistant*- Easy use
The two-part, gap filling Gorilla Epoxy formula sets in just 5 minutes, providing a high strength and water resistant bond which dries crystal clear.
©2021 Gorilla Glue Europe Ltd.
Gap FillingIncredibly Strong100% ToughHigh strength holds 240kg/cm²Permanent, Strong & Durable
Pack size: 25ML
Produce of
Made in USA
Net Contents
2 x 12.5ml
Preparation and Usage
DirectionsPrepareAll surfaces to be bonded should be clean and dry. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. Ensure your work area is well-ventilated and protected from spills.Remove stir stick from middle of plunger. With nozzle pointing upward, snap the sealing cap off the syringe then eliminate any air by slowly pushing plunger until resin and hardener reach the tip.1 Dispense & MixDispense resin and hardener onto a clean, disposable surface until they are both flowing equally. Even amounts of the resin and hardener can then be dispensed into a disposable mixing tray. The package blister can be used as a mixing tray for the first use. Stir the mixture for at least 20 seconds, until it is uniform. As you mix, you will notice that the epoxy warms up - this is a reaction that occurs as the resin and hardener combine.2 ApplyApply mixture to surface within 5 minutes. Bond strength will decrease the longer you wait to apply. Remove any excess glue immediately from project surface with a dry cloth.3 GripTo achieve maximum bond strength, clamp surfaces together and leave undisturbed for 30 minutes. Full cure achieved in 24 hours.Bond set time: 5 Minutes to apply and position. Handling: 30 Minutes undisturbed. Full cure: 100% in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times.Bond Set Time: 5 minutes to apply and position.Handling: 30 minutes undisturbed.Full Cure: 100% in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times.Temperature Range: bond withstands -23°C to 82°C.Cured Colour: dries clear.Clean Up: remove excess glue immediately from project surface with dry cloth and acetone, mineral spirits or rubbing alcohol.
| Product Height | 21.8CM |
|---|---|
| Product Width | 3.8CM |
| Product Weight | 0.08KG |
| Manufacturer Warranty Period | Not Known |
To close, slightly pull back on plunger, wipe tip with a dry cloth and then replace cap tightly. Store in a cool, dry place away from children and animals.
Tube. Not Recyclable
Gorilla Epoxy Resin and HardenerGorilla Epoxy (Hardener)Contains: Poly[oxy(methyl-1,2-ethanediyl)], α-hydro-ω-hydroxy-, ether with 2,2-bis(hydroxymethyl)- 1,3-propanediol (4:1), 2-hydroxy-3-mercaptopropyl ether and 2,2,4(or 2,4,4)-trimethylhexane-1,6-diamine.CLP Regulation - CorrosionCLP Regulation - Exclamation PointDANGER: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long-lasting effects.Gorilla Epoxy (Resin)Contains: Bis-[4-(2,3-epoxipropoxi) phenyl]propane.CLP Regulation - Exclamation PointCLP Regulation - EnvironmentWARNING: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long-lasting effects.If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing vapours. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. Dispose of contents/container in accordance with local, state or national legislation.
Manufacturer Address
Gorilla Glue Europe Ltd,PO Box 663,Chorley,PR6 6PU,UK.
Return to
Gorilla Glue Europe Ltd,PO Box 663,Chorley,PR6 6PU,UK.Tel: +44 (0)843 507 1200
Using Product Information
While every care has been taken to ensure product information is correct, food products are constantly being reformulated, so ingredients, nutrition content, dietary and allergens may change. You should always read the product label and not rely solely on the information provided on the website.
If you have any queries, or you'd like advice on any Tesco brand products, please contact Tesco Customer Services, or the product manufacturer if not a Tesco brand product.
Although product information is regularly updated, Tesco is unable to accept liability for any incorrect information. This does not affect your statutory rights.
This information is supplied for personal use only, and may not be reproduced in any way without the prior consent of Tesco Stores Limited nor without due acknowledgement.
Tesco © Copyright 2025
No reviews yet
Help other customers like you
Reviews are submitted by our customers directly through our website. We also share reviews from other retailers' websites to help you make an informed decision.
Write a review